If you encounter connectivity issues or experience frequent signal drops on your Verizon iPhone, the recommended course of action is to update the cell towers. Updates for cell towers on iPhones are typically provided by the original carrier, such as Verizon, T-Mobile, or Virgin. While this guide focuses specifically on Verizon, the process is generally similar across carriers.
Updating carrier settings proves advantageous as it introduces new features released by Verizon. For instance, if VoLTE (Voice over LTE) was unavailable previously, it should become accessible after the update. Normally, carrier settings are automatically downloaded and prompted before updating. However, if this doesn’t occur, carefully follow the instructions in this guide. Let’s proceed.
Table of Contents
Why Do You Need to Update Cell Towers in Verizon iPhone?
Unlike countries that utilize GSM communication, Verizon iPhones operate on the traditional CDMA network. Consequently, updating cell towers becomes essential to ensure optimal performance and network connectivity in all areas.
In more severe scenarios, you might experience a strong network signal in one part of your home, like the bedroom, but encounter significant drops when you move to another area, such as the living room. This inconsistency is often a result of not updating cell towers. Keeping them updated eliminates such issues, providing a more stable and reliable network.
Moreover, when carriers release new features like VoIP or VoLTE, updating cell towers on your Verizon iPhone becomes crucial to access these advancements. Neglecting to do so can lead to persistent network problems and unreliable signals. Therefore, it is always in your best interest to update cell towers whenever you encounter network issues.
How To Update Cell Towers Verizon iPhone | Verizon Tower Update Code
Under ideal circumstances, if a cell tower update is available for your Verizon iPhone, you will receive a prompt to install it. If there’s no prompt, you’ll need to manually search for and install the update. In case any issues arise, you might also need to reset the cell towers. The detailed steps are outlined below.
Depending on your carrier’s requirements, a cell tower update may be released. If you have a pending update, follow these steps to install it:
- Open Settings.
- Tap on General.
- Select About.
- If a Carrier update is pending, you’ll find it here. Follow the on-screen instructions to download and install the update.
If you have recently installed an eSIM that is not from Verizon, follow these steps:
- Open Settings.
- Tap on General.
- Select About.
- On the About page, locate Carrier and tap on it.
- You will see a notification that a Carrier update is available. Click on Install to let the update download and install itself.
How to Update Cell Towers on the Latest iPhones?
If you own one of the latest iPhones, such as the iPhone 12 to iPhone 14, you no longer need to manually update carrier settings. Your iPhone is designed to handle this process automatically.
Simply restarting the phone is usually sufficient, and in some cases, toggling on and off the flight mode can also trigger the update for cell towers. Additionally, recent developments in technologies like 5G have diminished the necessity of manual cell tower updates on iPhones.
Carrier updates are typically delivered through phone updates, and once installed, there’s no need to concern yourself with updating cell towers on the latest iPhones, even if they are from Verizon.
How to Reset Cell Towers in Verizon iPhone?
If you’re experiencing persistent network issues like signal drops or fluctuations in internet speed on your Verizon iPhone, you may need to reset the cell towers. The steps for this process are simple. Just follow these instructions:
- Open Settings.
- Tap on General.
Now, click on Transfer or Reset iPhone.
Again, select Reset. Now, click on Reset Network Settings.
Now, input your Passcode to confirm the operation. Once the specified steps are completed, your carrier settings will be reset, resolving network issues.
However, if you own one of the latest iPhones, you don’t need to perform this action. Instead, simply enable Data Roaming. You can find this option by following these steps:
- Open Settings: Unlock your iPhone and locate the “Settings” app, represented by a gear icon usually found on your home screen.
watch-weather-channel-on-directv
Locate Cellular (or Mobile Data): In the Settings menu, scroll down and select “Cellular” (or “Mobile Data,” depending on your region).
Enable Data Roaming: In the Cellular (or Mobile Data) menu, you will find an option labeled “Mobile Data.” Toggle the switch next to it to turn it on.
Now, click on “Mobile Data Options” and tap the switch next to Data Roaming to turn it on. The switch will turn green when enabled.
Confirm: A pop-up message may appear, providing information about potential roaming charges. Read the message and tap “Enable” to confirm if you wish to proceed. This is the process for resetting carrier settings on your iPhone, applicable to both older and newer-generation devices.
Is Dialing 228 Necessary for Updating My Verizon Phone For 3G Devices: If you have an older 3G device, such as an older phone, then yes, you would still use *228 to update your phone’s network settings. For 4G LTE/5G Phones: If you’re using a newer 4G LTE/5G phone, you don’t need to dial *228 to update the Preferred Roaming List. This task is managed by the SIM card inside your phone, or in the case of eSIM, you simply need to update your iOS Version.
The Bottom Line
Well, that concludes our guide on how to update cell towers on a Verizon iPhone. We trust this information has been helpful to you. If you still have any questions or uncertainties, feel free to comment below.